Bluejay Mining plc / EPIC: JAY / Market: AIM / Sector: Mining

 

17 November 2017

 

Bluejay Mining plc ('Bluejay' or the 'Company')

Updated Corporate Presentation

 

Bluejay Mining plc, the AIM and FSE listed company with projects in Greenland and Finland, is pleased to announce that an updated corporate presentation, which was used at the 11^th annual TZMI titanium and zirconium conference, is now available to view on the Company's website at www.titanium.gl.

 

**ENDS**

 

For further information please visit http://www.titanium.gl or contact:

 

Roderick McIllree	Bluejay Mining plc	+44 (0) 20 7907 9326
Ewan Leggat	SP Angel Corporate Finance LLP	+44 (0) 20 3470 0470
Soltan Tagiev	SP Angel Corporate Finance LLP	+44 (0) 20 3470 0470
Charlotte Page	St Brides Partners Ltd	+44 (0) 20 7236 1177
Megan Dennison	St Brides Partners Ltd	+44 (0) 20 7236 1177

 

Notes

 

Bluejay has a number of highly prospective licences at various stages of development in Greenland and Finland.  The Company is dual listed on the London AIM market and Frankfurt Stock Exchange.

 

The Company is currently focussed on advancing the Dundas Ilmenite Project in Greenland, an area that has only recently revealed its mineral potential following changes in the climate.   Dundas, which with an initial Inferred JORC resource of 23.6Mt at 8.8% ilmenite (in situ), including a high-grade zone equal to 7.9Mt at 14.2% ilmenite, and significant further upside, has been proven to be the highest-grade mineral sand ilmenite project globally.  

 

Dundas comprises three main target areas along an >40km coastline historically proven to contain large and high-grade accumulations of primary ilmenite occurring as placer deposits in the following environments:

 

·    Raised beaches; containing ilmenite accumulations over widths of more than 1km, of unknown depths, along more than 30km of coastline;

·    Active beaches; which refer to the area seaward of the frontal dunes, including the beach, tidal zones and surf zone; and

·    Drowned beaches; refers to the areas seaward of active beaches.

 

The Company's strategy is focused on the production of a bulk sample "proof of concept" from the Dundas Ilmenite Project in 2017 with the aim of ultimately generating cash flow to create a company capable of self-funding exploration on current projects and future acquisitions.

 

Bluejay also holds a 100% interest in a portfolio of copper, zinc and nickel projects in Finland.  This multi-commodity portfolio remains a strategic asset of importance and has been restructured to be cost-sustainable whilst determining the best plan for future development.

 

Dundas Mineral Resource Estimate

 

The Dundas mineral resource estimate has been prepared by SRK Exploration Services ('SRK') and is broken down into three components:

 

·    An Inferred resource of 23.6Mt at 8.8% ilmenite (in situ) for the total area tested

·    This includes a high-grade zone equal to 7.9Mt at 14.2% ilmenite (in situ) at Moriusaq which is the focus of the feasibility and production studies that are currently underway

·    A larger exploration target for the area, primarily encompassing potential mineralisation below and inland from the current drilling, of between 90Mt to 130Mt at an in-situ grade of between 6.3% and 8.4% ilmenite

 

SRK has produced a Mineral Resource Estimate for the Dundas onshore raised beaches target that forms part of Bluejay's exploration licence in Northwest Greenland (licence number 2015/08). This is the maiden Mineral Resource Estimate produced for the licence. The Mineral Resource Estimate report prepared by SRK will be made available during Q2 2017.

 

The Mineral Resource Estimate is based on all valid data available as at 1 March 2017.  A volume of the raised beaches has been modelled which encompasses the drilled portion of these areas with a maximum depth limit set at 3 metres below ground level.  The model covers a surface area of approximately 5km by up to 0.9km. The model was incorporated into a three-dimensional block model and the in situ titanium dioxide ('TiO2') grade and percent recoverable heavy mineral content were interpolated using an inverse distance weighted ('IDW') algorithm.

 

SRK considers that all the delineated mineralisation has reasonable prospects for eventual economic extraction and the Mineral Resource Statement has been reported at a 0% cut-off grade using the terminology and guidelines set out in the JORC 2012 Code.

 

Table 1:   JORC Mineral Resource Statement for Dundas Onshore Target, April 2017

Classification	Volume (M.m3)	Tonnage (M.t)	Density (t/m3)	% THM	% >2mm	% >5mm	%	% TiO2  In HM	% TiO2   In-situ	% Ilmenite In-situ
Inferred	11.2	23.6	2.12	34.5	29.0	21.8	2.5	12.0	4.2	8.8

(1)   The effective date of the Mineral Resource is April 6th, 2017

(2)   The numbers are presented at a 0% cut-off grade

(3)   "THM" and "HM" mean Total Heavy Minerals and Heavy Minerals respectively

(4)   HM have been separated from a -2 mm +63 µm size fraction using heavy liquid separation at a density of 2.95 g/cm³

(5)   Preliminary mineralogical assessments suggest that the HM typically comprises 26.76% ilmenite and that there are no other valuable HM present. Additional mineralogical data is expected during April 2017

(6)   % TiO₂ in-situ assumes that all recoverable TiO₂ is in the HM component of the -2 mm +63 µm size fraction

(7)   % Ilmenite In-situ assumes that all TiO₂ is within ilmenite and that the ilmenite contains 47.65% TiO₂, based on historical exploration data

SRK has also produced a Mineral Resource Statement has been reported at a 5% in-situ TiO₂ cut-off grade using the terminology and guidelines set out in the JORC 2012 Code.

 

Table 2:   JORC Mineral Resource Statement for Dundas Onshore Target, April 2017. 5% in-situ TiO₂ cut-off grade applied.

Classification	Volume (M.m3)	Tonnage (M.t)	Density (t/m3)	% THM	% >2mm	% >5mm	%	% TiO2  In HM	% TiO2   In-situ	% Ilmenite In-situ
Inferred	3.7	7.9	2.12	44.3	22.2	16.7	2.1	15.3	6.8	14.2

(1)   The effective date of the Mineral Resource is April 6th, 2017

(2)   The numbers are presented at a 5.0% in-situ TiO₂ cut-off grade

(3)   "THM" and "HM" mean Total Heavy Minerals and Heavy Minerals respectively

(4)   HM have been separated from a -2 mm +63 µm size fraction using heavy liquid separation at a density of 2.95 g/cm³

(5)   Preliminary mineralogical assessments suggest that the HM typically comprises 26.76% ilmenite and that there are no other valuable HM present. Additional mineralogical data is expected during April 2017

(6)   % TiO₂ in-situ assumes that all recoverable TiO₂ is in the HM component of the -2 mm +63 µm size fraction

(7)   % Ilmenite In-situ assumes that all TiO₂ is within ilmenite and that the ilmenite contains 47.65% TiO₂, based on historical exploration data

SRK is of the opinion that there is a high probability that a proportion of this currently reported Inferred Mineral Resource can be upgraded to the Indicated category following additional exploration. Further, SRK considers that there is a high probability that the raised beaches hosting this Mineral Resource extend both at depth and laterally along the shoreline within Bluejay's licence area. The licence area includes a 30 km length of raised beaches and deltas and Bluejay has demonstrated mineralisation in several places in addition to the area covered by the Mineral Resource presented here.

 

In addition to the Mineral Resource Statement, SRK has derived an Exploration Target which is planned to be tested by the Company in the next field season. The Exploration Target tonnage range reflects SRK's opinion that the mineralization has potential to be continuous between 9m and 12m below surface (SRK's Mineral Resource estimate has been restricted to 3m) which is based on a limited amount of outcrop exposure. In summary, it comprises potential mineralisation below the depth currently drilled. The exploration grade range is based on the grade of the overlying Mineral Resource.

 

SRK's Exploration Target is between 90Mt and 130Mt with an in-situ TiO2 grade of between 3% and 4% (assumed to be between 6.3% and 8.4% ilmenite) and a heavy mineral content of between 30% and 34% of which between 10% and 12% will comprise TiO2 (assumed to be between 21% and 25% ilmenite). It should be noted that this is an estimated range of tonnes and grade and is conceptual in nature, that there has been insufficient exploration to estimate a Mineral Resource and that it is uncertain if further exploration will result in the estimation of a Mineral Resource.